Continuous feeding and discharging rotary tube furnace

Model：KJ-TX1000-H159CK3

Description：

The continuous feeding and discharging rotary tube furnace is made into an adjustable tilt angle, and the angle is adjusted by electric or hydraulic support (electric or hydraulic adjustment is selected according to the weight of the entire furnace body).

Introduction:
The continuous feeding and discharging rotary tube furnace is made into an adjustable tilt angle, and the angle is adjusted by electric or hydraulic support (electric or hydraulic adjustment is selected according to the weight of the entire furnace body). The discharging speed is adjusted by adjusting the tilt angle. The rotary tube furnace adopts a spiral feeding method, and the speed reducer, motor, and speed control system are used to control and adjust the rotation speed of the spiral to achieve the speed of material entry. It is easy to open. The furnace tube adopts 310S metal furnace tube, which can rotate 360℃. The heating element adopts high-quality alloy heating wire, which has a fast heating rate, high temperature resistance, oxidation resistance, corrosion resistance, and fast heating; intelligent PID 30-stage program temperature control, high temperature control accuracy; sealing flange, good sealing ring performance, professionally used for laboratory calcination and drying of battery positive and negative electrode materials, non-strong acid and alkaline powder materials, and granular materials. Users can choose to burn under vacuum or atmosphere protection according to the materials to be burned.

Application:
The continuous feeding and discharging rotary tube furnace is suitable for the experiment and production of fine particle powder materials such as metal oxides or other inorganic materials. It is a continuous production equipment for sintering and calcining particle powders in powder metallurgy, ceramics, refractory materials, lithium battery positive and negative electrode materials, new energy and other industries, and measuring materials under certain atmosphere conditions.

Continuous feeding and discharging rotary tube furnace

Product name	Continuous feeding and discharging rotary tube furnace
Model	KJ-TX1000-H159CK3
Chamber material	The furnace is made of alumina polycrystalline fiber
Tube size	Diameter Φ159mm*2300mm (subject to actual conditions)
Heating zone	Three temperature zones. Total length of heating zone 1000mm
Tube material	310S Metal tube
Working temperature	≤950℃
Max. temperature	1000℃
Heating element	High quality alloy heating wire
Temperature control accuracy	±1℃
Heating rate	0-20℃/min，10℃/min is recommended, which can be adjusted according to the experimental process
Temperature test element	Three N-type thermocouples
Temperature control system	LCD touch screen operation, intelligent multi-stage PID programmable control The temperature control system adopts artificial intelligence adjustment technology, has PID adjustment, self-tuning functions and can compile multi-stage temperature rise and fall programs; 1. Use PID to adjust temperature control, and can set multi-stage temperature rise and fall programs 2. Temperature control accuracy ±1ºC 3. Over-temperature protection and broken couple protection. The electric furnace heating circuit is automatically cut off when over-temperature or broken couple is overheated 4. The instrument has the function of temperature self-tuning 5. Touch screen operation, data can be output and stored
Tilt angle	0-15 degrees (adjustable), adjust the tilt angle by button
Rotation rate	The fastest speed is 5rpm/min, and the rotation direction and speed can be adjusted by adjusting the knob.
Rotating structure	Rotation mode, the furnace tube can rotate 360° and the furnace body can be tilted
Intake control	Equipped with float flowmeter, flow range can be selected according to customer requirements
Inlet and outlet silo	The inlet and outlet silos are mechanically sealed. The silo is made of 304 and has a capacity of 20L. The discharge end is wrapped with a heating tape to heat it and prevent condensation. The receiving silo uses double valves and is detachable without damaging the sealing of the reaction tube.
Condensation collection device	A two-stage condenser is used, passing through a buffer tank and a water-sealed tank, and a safety pressure relief function is provided during the condensation collection process.
Feed rate	There will be differences depending on the material density, actual residence time, etc., please refer to the actual situation
Operating voltage	AC 380v 50Hz
Heating power	about 20KW
Provide related accessories	Crucible hook, high temperature gloves, thermocouple, instruction manual, warranty card, etc.

Continuous feeding and discharging rotary tube furnace

Single-Zone Tube Furnace

Multi-Zone Tube Furnace

Rotary Tube Furnace

Vertical Tube Furnace

Slideway Tube Furnace

RTP fast Annealing Furnace

Lab Scale Pyrolysis Furnace

Diffusion Oxidation Tube Furnace

Ultrasonic Spray Pyrolysis Furnace

High temperature high pressure

OLED material purification

400℃-1200℃ Box Furnace

1300℃-1400℃ Box Furnace

1500℃-1700℃ Box Furnace

Bell Type Furnace

Crucible Furnace

Bogie Hearth Furnace

CVD Furnace System

PECVD Furnace System

Roll-to-roll graphene film growth equipment

LP/AP CVD System

Coating equipment

Vacuum Sintering Furnace

Vacuum Annealing Furnace

Vacuum Brazing Furnace

Vacuum Tempering Furnace

Vacuum Hot Pressing Furnace

Vacuum Gas Quenching Furnace

Vacuum Carbon Tube Furnace

400℃-1200℃

1300℃-1400℃

1500℃-1700℃

Custom Vacuum Furnace

Custom Box Furnace

Custom Tube Furnace

Zirconia Sintering Furnace

Porcelain Press Furnace

Vacuum Porcelain Furnace

Dental Dewaxing Furnace

Vacuum System and Gas Mixing System

Reactors

Induction Furnace

Vacuum Oven

Accessories and Consumables